Email : info@tslcd.com
Tel : +86-755-28225963
Download
Description:
Team Source Display model TST070WSBE-136C is a standard 7'' colorful LCD, normally black, transmissive type IPS panel with viewing angle,
1024x600 resolution, EK79007AD3+EK73217BCGA driver IC, MIPI interface, 16.7M color depth, Anti-glare surface treatment.
with CTP, high brightness 700nits.
Drawing:
Specifications:
| General Specification | ||
| Display mode |
7'' TFT, Transmissive, Normal white,IPS |
|
| Part No. | TST070WSBE-136C | |
| Outline Dimension(mm) |
190.08(W)x121.92(H)x7.43(D) |
|
| Active Area(mm) | 154.21(W) x 85.92(H) | |
| Resolution(dots) | 1024x (RGB) × 600 | |
| Operating temperature(°C) | -20 ~ +70°C | |
| Storage temperature(°C) | -30 ~ +80°C | |
| Operating Voltage |
3.3V | |
| Touch panel | with CTP (FT5446) | |
| Driver IC | EK79007AD3+EK73217BCGA | |
| Pixel arrangement | RGB-stripe | |
| View direction | ALL | |
| Interface | MIPI interface | |
| Brightness | 800nits | |
| Backlight | 36LEDs, 300mA, 9.3V | |
| Weight(g) | TBD | |
| Power Consumption(w) | Panel | TBD(Typ.) |
| B/L system | TBD(Typ.) | |
| Module lifetime(Hours) | 30,000-50000 | |
| LCM interface definition | ||
| Pin No. | Symbol | Description |
| 1 | LEDA | LED Anode |
| 2 | LEDA | LED Anode |
| 3 | VGH | Gate oN Voltage |
| 4 | VGL | Gate OFF Voltage |
| 5 | UPDN | Up/down selection |
| 6 | SHLR | Left/right selection |
| 7 | LEDK | LED Cathode |
| 8 | LEDK | LED Cathode |
| 9 | AVDD | Power for Analog Circuit |
| 10 | GND |
System Ground. (0V) |
| 11 | MIPI_DP3 | MIPI Positive data input |
| 12 | MIPI_DN3 | MIPI Negative data input |
| 13 | GND |
System Ground. (0V) |
| 14 | MIPI_DP2 | MIPI Positive data input |
| 15 | MIPI_DN2 | MIPI Negative data input |
| 16 | GND | System Ground. (0V) |
| 17 | MIPI CLKP | MiPl Positive clock input |
| 18 | MIPI CLKN | MlPINegative clock input |
| 19 | GND | System Ground. (0V) |
| 20 | MIPI_DP1 |
MIPI Positive data input |
| 21 | MIPI_DN1 |
MIPI Negative data input |
| 22 | GND | System Ground. (0V) |
| 23 | MIPI_DP0 |
MIPI Positive data input |
| 24 | MIPI_DN0 |
MIPI Negative data input |
| 25 | GND | System Ground. (0V) |
| 26 | STBYB |
Standby mode, Normally pulled high STBYB-"1" normal operation STBYB-"0”, timing controller, source driver will turn off, all output are High-Z. |
| 27 | RESET |
Reset input signal active low. |
| 28 | VDD1.8V |
Power voltage for digital circuit 1.8V |
| 29 | VDD1.8V |
Power voltage for digital circuit 1.8V |
| 30 | VCOM |
Common voltage. |
| CTP interface definition | ||
| Pin No. | Symbol | Description |
| 1 | NC | Not connect |
| 2 | NC | Not connect |
| 3 | RST | External Reset, Low is active |
| 4 | GND | Ground.(0V) |
| 5 | INT | Interrupt request to the host |
| 6 | SDA(3.3V) | 12C data input and output |
| 7 | SCL(3.3V) | 12C clock input |
| 8 | GND | Ground.(0V) |
| 9 | GND | Ground.(0V) |
| 10 | VDD(3.3V) | Power supply +3.3V |
Applications:
For this 7 inch TFT LCD display TST070WSBE-136C, 1024x600 resolution, suitable for Industrials Equipment,
Medical devices, Household appliances, consumer products.
Product Features:
1. Landscape 1024x600 with MIPI interface
2. High brightness 800nits.
3. Wide viewing direction.
4. Operating temperature -20~+70 degree.
