Email : info@tslcd.com
Tel : +86-755-28225963
Download
Description:
Team Source Display model TST057VGGH-02 Colorful TFT LCD, Industrial grade display, VGA (640 horizontal by 480 vertical pixels) resolution, normally white with transmissive type, HX8250-A01+HX8678B driver IC, RGB 18bits 40pininterface, high brightness 1000nits.
Drawing:
Specifications:
| General Specification | ||
| Display mode |
Normally white,TN, 5.7 inch TFT, Transmissive |
|
| Part No. | TST057VGGH-02 | |
| Outline Dimension(mm) |
127.00(W)x98.43(H)x5.8(D) |
|
| Active Area(mm) | 115.20(W) x 86.40(H) | |
| Resolution(dots) | 640x (RGB) × 480 | |
| Operating temperature(°C) | -20 ~ +70°C | |
| Storage temperature(°C) | -30 ~ +80°C | |
| Touch panel | available with CTP&RTP | |
| Driver IC | HX8250-A01+HX8678B | |
| Pixel arrangement | RGB-stripe | |
| Backlight | 21LEDs | |
| View direction | 6H | |
| Weight(g) | TBD | |
| Power Consumption(w) | Panel | TBD(Typ.) |
| B/L system | TBD(Typ.) | |
| Interface | RGB 18bits | |
| Module lifetime(Hours) | 30,000-50000 | |
| Pins Description | ||
| Pin No. | Symbol | Description |
| 1 | U/D |
Up/down scan setting. When U/D=H, reverse scan. When U/D=L, normal scan. |
| 2 | NC | No connection |
| 3 | HSYNC |
Horizontal sync input in digital RGB and CCIR601 mode. (Short to GND if not used) |
| 4 | VLED | Power supply for BLU LDO circuit. |
| 5 | VLED | Power supply for BLU LDO circuit. |
| 6 | VLED | Power supply for BLU LDO circuit. |
| 7 | VCC | Power supply. |
| 8 | VSYNC |
Vertical sync input in digital RGB and CCIR601 mode. (Short to GND if not used) |
| 9 | DE |
Input data enable control. When DE mode, active High to enable data input. Default pull low. |
| 10 | NC(X2) |
No connection.(Touch panel control PIN: X2) |
| 11 | NC(Y1) | No connection.(Touch panel control PIN: Y1) |
| 12 | ADJ | Chip Enable (Active High). |
| 13 | B5 | Blue data input. |
| 14 | B4 | Blue data input. |
| 15 | B3 | Blue data input. |
| 16 | VSS | Power ground. |
| 17 | B2 | Blue data input. |
| 18 | B1 | Blue data input. |
| B0 | Blue data input. | |
| 20 | VSS | Power ground. |
| 21 | G5 | Green data input. |
| 22 | G4 | Green data input. |
| 23 | G3 | Green data input. |
| 24 | VSS | Power ground. |
| 25 | G2 | Green data input. |
| 26 | G1 | Green data input. |
| 27 | G0 | Green data input. |
| 28 | VSS | Power ground |
| 29 | R5 | Red data input. |
| 30 | R4 | Red data input. |
| 31 | R3 | Red data input. |
| 32 | VSS | Power ground. |
| 33 | R2 | Red data input. |
| 34 | R2 | Red data input. |
| 35 | R0 | Red data input. |
| 36 | NCX1) |
No connection.(Touch panel control PIN: X1). |
| 37 | NC(Y2) |
No connection.(Touch panel control PIN: Y2). |
| 38 | DCLK |
Clock sigral. I atching data at the nising edge. |
| 39 | VSS | Power ground. |
| 40 | LR |
Ihe shift direction of device internal shift register is controlled by this pin. as shown below: L/R=H:STH->SO1->...->SO960->STHO L/R=L: STH->SO960->...->SO1->STHO |
Applications:
For this 5.7 inch TFT LCD display TST057VGGH-02, Industrial grade with high bitghtness that is sunlight readable could be suitable for Industrial equipment. Instrument panel, Industrial PC, Test&Measurement equipment, automation equipment.
Product Features:
1. High brightness & Sunlight Readable.
2. Outdoor & Indoor Applications.
3. Industrial grade
