Email : info@tslcd.com
Tel : +86-755-28225963
Download
Description:
TST050WVHS-36 is a 5 inch color LCD display 800x480 resolution with SSD1963 driver IC, this display is coming out with MCU interface, support 8 bits and 16 bits parallel port. It's without touch screen, available to add our standard resistive touch panel or capacitive touch panel on it. Standard brightness is 500 cd/m2, TSD also have the other model with 1000 nits high brightness, which have a very good performance under strong sunlight and good for outdoor applications.
Drawing:
Specifications:
| General Specification | ||
| Part No. | TSM050WVHS-36 | |
| Outline Dimension(mm) |
120.7(W)x75.8(H)x2.95(D) |
|
| Active Area(mm) | 108(W) x 64.8(H) | |
| Resolution(dots) | 800x (RGB) × 480 | |
| Operating temperature(°C) | -20 ~ +70°C | |
| Storage temperature(°C) | -30 ~ +80°C | |
| Number of Pixel(pixels) | 800RGB(H)xRGBx480V) | |
| Touch panel | without | |
| Driver IC | SSD1963 | |
| Pixel arrangement | RGB-stripe | |
| Display mode | Normal black, IPS, 5 inch TFT | |
| Surface treatment | Antiglare | |
| View direction | All o'clock | |
| Weight(g) | TBD | |
| Power Consumption(w) | Panel | TBD(Typ.) |
| B/L system | TBD(Typ.) | |
| Interface | MCU |
|
| Module lifetime(Hours) | 30,000-50,000 | |
| Pins Description | ||
| Pin No. | Symbol | Description |
| 1 | Ground | System Ground.(OV) |
| 2 | VCC (5V) | Power supply +5.5V |
| 3 | BL_EN | High, Backlight ON; Low, Backlight OFF |
| 4 | RS | Data/Command Selection pin |
| 5 | WR | Write signal |
| 6 | RD | Read signal |
| 7~22 | DB0~DB15 | MCU16-bit Data Bus |
| 23 | NC | Not connection |
| 24 | NC | Not connection |
| 25 | CS | Chip select signal |
| 26 | RESET | Reset input signal |
| 27 | NC | Not connection |
| 28 | NC/XR | Not connection/The touch panel × right |
| 29 | NC/YD | Not connection/The touch panel Y down |
| 30 | NC/XL | Not connection/The touch panel X left |
| 31 | NC/YU | Not connection/The touch panel Y up |
| 32 | DISP |
Standby mode control.(Normally pull high) DISP="L", enter standby mode for power saving. Timingcontroller and source driver will turn off, all outputs are Hi-Z.DISP=H", normal operation. |
Applications:
TSD is offering all kinds of TFT LCD with SSD1963 control board that are ideal for different applications including: Smart home & white goods, Security & Intercom, Medical PDA & EGC, Dashboard, Navigation system, Industrial instrustment, EV Charger, Handheld terminals, Smart wearable device, etc.
