Email : info@tslcd.com
Tel : +86-755-28225963
Download
Description:
TST050WVBS-106 is 5 inch 800x480 resolution LCD display with SPI interface, standard brightness is 400cd/m2. For this 5 inch TFT LCD module, driver IC is LT7680A-R, viewing direction is Free. color depth is 16.7M, operating voltage is 3.3V, this lcd module can be with resistive or capacitive touch panel, customized design are also welcome. this 5 inch lcd is suitable for industrial grade and automotive application.
| Specification | ||
| Part No. | TST050WVBS-106 | |
| Outline Dimension(mm) | 120.70x75.80x2.9 | |
| Active Area(mm) | 108.00x64.80 | |
| Resolution(dots) | 800*RGB*480 | |
| Operating temperature(°C) | -20-70 | |
| Storage temperature(°C) | -30-80 | |
| Number of Pixel(pixels) | 800RGB(H)xRGBx480(V) | |
| Touch panel | without | |
| Dot Pitch | 0.0642(W)x0.1790(H) | |
| Pixel arrangement | RGB Vertical stripe | |
| Display mode | Normal black,IPS, 5.0 inch TFT | |
| Surface treatment | Antiglare | |
| View direction | ALL | |
| Weight(g) | TBD | |
| Power Consumption(w) | Panel | 0.226(Typ.) |
| B/L system | 1.674(Typ.) | |
| Interface | SPI | |
| Module lifetime(Hours) | 50,000-100,000 | |
Drawing:
Interface Description:
| Pin No. | Symbol | Description |
| 1 | LEDA | Backlight A Anode input pin. |
| 2 | LEDK | Backlight K Cathode input pin. |
| 3 | GND | System Ground. (0V) |
| 4 | GND | System Ground. (0V) |
| 5 | VDD | Power supply +3.3V |
| 6 | VDD |
Power supply +3.3V |
| 7 | GND | System Ground. (0V) |
| 8 | DISP |
Standby mode control. (Normally pull high) DISP="L", enter standby mode for power saving. Timing controller and source driver will turn off, all outputs are Hi-Z. DISP=“H", normal operation. |
| 9 | L RST | Reset Signal Input. This is a active low Reset pin for LT7680. |
| 10 | L SPI CS | Chip select pin for 4-wire serial I/F of the LT7680 |
| 11 | L SPI_MISO | Data output pin of 4-wire SPI I/F of the LT7680. Connect to MCU"s |
| 12 | L SPI MOSI | Data input pin of 4-wire SPI I/F of the LT7680. Connect to MCU"s |
| 13 | L SPI SCK | SPI Clock input.Clock of 4-wire SPI I/F of the LT7680 . |
| 14 | GND | System Ground. (0V) |
| 15 | F CS | SPI Chip select pin for serial Flash device.(option) |
| 16 | F DO | Data output of serial Flash device.(option) |
| 17 | F CLK | Serial clock input for serial Flash device.(option) |
| 18 | F DI | Data input of serial Flash device.(option) |
| 19 | GND | System Ground. (0V) |
| 20 | YU | The RTP PIN(option). NO connect |
| 21 | XL | The RTP PIN(option). NO connect |
| 22 | YD | The RTP PIN(option). NO connect |
| 23 | XR | The RTP PIN(option). NO connect |
| 24 | GND | System Ground. (0V) |
Applications:
For our 5 inch LCD display TST050WVBS-106, it's widely using in industrial product, Industrial equipment and instruments can be used.
Product Features:
1.5‘’ 800*480 res. with 24 Pins SPI interface
2. IPS lcd full viewing angle
3.high brightness up to 400nits
4.high contrast 800:1
5. TSD have full ranges of TFT display from 0.96 inch to 32 inch, customized design are warmly welcome.
