Email : info@tslcd.com
Tel : +86-755-28225963
Download
Description:
Team Source Display model TSO7240-A01 is a monochrome OLED display module with 72×40 dot matrix. I2C interface. high technology for low power consumption without backlight. high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range, and available to add with touch screen or cover glass on top.
Drawing:
Specifications:
| General Specification | ||
| Display mode |
0.42'' Passive Matrix OLED Monochrome Display |
|
| Part No. | TSO7240-A01 | |
| Outline Dimension(mm) |
12(W)x11(H)x1.28(D) |
|
| Active Area(mm) | 9.196(W) x 5.18(H) | |
| Resolution(dots) | 72×40 dots | |
| Color | White | |
| Operating temperature(°C) | -40 ~ +70°C | |
| Storage temperature(°C) | -40 ~ +85°C | |
| Operating Voltage |
3.3V | |
| Touch panel | could support with cover glass and touch screen | |
| Driver IC | SH1106 | |
| Interface | I2C | |
| Dot size | 0.108x0.11 | |
| Duty | 1/64 | |
| Weight(g) | 0.37g | |
| Power Consumption(w) | Panel | TBD(Typ.) |
| B/L system | TBD(Typ.) | |
| Module lifetime(Hours) | 30,000-50000 | |
|
LCM interface definition |
|
|
| 1 | C1N |
C1P/CIN - Pin for charge pump capacitor; Connect to each other with a capacitor. |
| 2 | C1P | C1P/CIN - Pin for charge pump capacitor; Connect to each other with a capacitor. |
| 3 | C2P | C2P/C2N - Pin for charge pump capacitor; Connect to each other with a capacitor. |
| 4 | C2N | C2P/C2N - Pin for charge pump capacitor; Connect to each other with a capacitor. |
| 5 | VDD-3.3V | 3.3V power supply pad for Power supply for charge pump circuit.. This pin should be disconnected when VPP is supplied externally. |
| 6 | VSS | ground pin. |
| 7 | /RES | This is a reset signal input pad. When /RES is set to “L, the settings are initialized. The reset operation is performed by the /RES signal level. |
| 8 | SCL | The serial clock input pad |
| 9 | SI | The serial data input pad |
| 10 | IREF |
This is a segment current reference pad. A resistor should be connected between this pad and VSS. |
| 11 | VCOMH |
This is a pad for the voltage output high level for common signals. A capacitor should be connected between this pad and VSS. |
| 12 | VPP |
OLED panel power supply. Generated by internal charge pump. Connect to capacitor. It could be supplied externally. |
Applications:
For this 0.42 inch white OLED Display, 72x40 resolution, suitable for Industrials Equipment,
Medical devices, Household appliances, Handheld devices and Consumer products.
Product Features:
1. Wide temperature range.
2. Low power consumption.
3. High contrast ratio.
