Email : info@tslcd.com
Tel : +86-755-28225963
Download
Description:
TST156FHBH-D174 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 15.6 inch diagonally measured active areawith Full-HD resolutions (1920 horizontal by 1080 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M(6bit+2FRC)colors and color gamut 45%. The TFT LCD panel used for this module is a low reflection and higher color type. Therefore, this module is suitable for Notebook PC. The LED driver for back-light driving is built in this model.
All input signals are eDP1.2 interface compatible.
Specifications:
| General Specification | ||
| Part No. | TST156FHBH-D174 | |
| Outline Dimension(mm) | 350.66x213.24x3.0mm |
|
| Active Area(mm) | 344.16×193.59mm |
|
| Resolution(dots) | 1920x1080 | |
| Operating temperature(°C) | -0 ~ +50°C | |
| Storage temperature(°C) | -20 ~ +60°C | |
| Number of Pixel(pixels) | 1920(H)xRGBx1080(V) | |
| Touch panel | without | |
| Brightness | 350 cd/m2 | |
| Pixel arrangement | RGB-stripe | |
| Display mode | Normal black,IPS, 15.6 inch TFT | |
| Surface treatment | Antiglare | |
| View direction | All |
|
| Weight(g) | TBD | |
| Power Consumption(w) | Panel | TBD(Typ.) |
| B/L system | TBD(Typ.) | |
| Interface | eDP | |
| Module lifetime(Hours) | 30,000 | |
| Pins Description | ||
| Pin No. | Symbol | Description |
| 1 | NC | No connection |
| 2 | H_GND | Ground |
| 3 | LANE1_N | eDP RX Channel 1 Negactive |
| 4 | LANE1_P |
eDP RX Channel 1 Positive |
| 5 | H_GND | Ground |
| 6 | LANE0_N | eDP RX Channel 0 Negactive |
| 7 | LANE0_P | eDP RX Channel 0 Positive |
| 8 | H_GND | Ground |
| 9 | AUX_CH_P | eDP AUX CH Positive |
| 10 | AUX_CH_N | eDP AUX CH Negative |
| 11 | H_GND | Ground |
| 12 | LCD_VCC | Power supply 3.3V (typical) |
| 13 | LCD_VCC | Power supply 3.3V (typical) |
| 14 | NC | NC |
| 15 | H_GND | Ground |
| 16 | H_GND | Ground |
| 17 | HPD | Hot plug detect output |
| 18 | BL_GND | LED Ground |
| 19 | BL_GND | LED Ground |
| 20 | BL_GND | LED Ground |
| 21 | BL_GND | LED Ground |
| 22 | BL_ENABLE | LED enable pin (+3.3V input) |
| 23 | BL_PWM | System PWM Signal Input |
| 24 | NC | No connection |
| 25 | NC | No connection |
| 26 | BL_POWER | LED Power Supply 7V~21V |
| 27 | BL_POWER | LED Power Supply 7V~21V |
| 28 | BL_POWER |
LED Power Supply 7V~21V |
| 29 | BL_POWER | LED Power Supply 7V~21V |
| 30 | NC | No connection |
Features:
- ● 2 lane eDP interface with 2.7Gbps link rates
● Thin and light weight
● 16.7M(6bit+2FRC)color depth, color gamut 45%
● Single LED lighting bar (Bottom side/Horizontal Direction)
● Data enable signal mode
● Side mounting frame
● Green product (RoHS & Halogen free product)
● On board LED driving circuit
● Low driving voltage and low power consumption
● On board EDID chip
