Email : info@tslcd.com
Tel : +86-755-28225963
Download
Description:
TST070WVBE-32C is a 7 inch 800x480 resolution color tft lcd module with MCU interface, integrated with SSD1963 controller board. This 7 inch LCD is with our standard capacitive touch panel, TSD could also make all kinds of customized designs. The LCD module size is 190.08x121.92mm, Lens VA is 154.84x86.63mm, LCD active area is 153.84x85.63mm. There is 3M9495LE adhesive tape on the back side of cover glass, we could also change to use other VHB tape for better water-proof function.
Drawing:
Specifications:
| General Specification | ||
| Part No. | TSM070WVBE-32C | |
| Outline Dimension(mm) |
190.08(W)x121.92(H)x3.25(D) |
|
| Active Area(mm) | 153.84(W) x 85.63(H) | |
| Resolution(dots) | 800x (RGB) ×480 | |
| Operating temperature(°C) | -20 ~ +70°C | |
| Storage temperature(°C) | -30 ~ +80°C | |
| Number of Pixel(pixels) | 800RGB(H)xRGBx480(V) | |
| Touch panel | with CTP | |
| Driver IC | SSD1963 | |
| Pixel arrangement | RGB-stripe | |
| Display mode | Normal white, TN, 7 inch TFT | |
| Surface treatment | Antiglare | |
| View direction | 12 o'clock | |
| Weight(g) | TBD | |
| Power Consumption(w) | Panel | TBD(Typ.) |
| B/L system | TBD(Typ.) | |
| Interface | MCU |
|
| Module lifetime(Hours) | 30,000-50,000 | |
| Pins Description for LCD (CN1) | ||
| Pin No. | Symbol | Description |
| 1 | Ground | System Ground.(OV) |
| 2 | VCC (5V) | Power supply +5.5V |
| 3 | BL_EN | High, Backlight ON; Low, Backlight OFF |
| 4 | RS | Data/Command Selection pin |
| 5 | WR | Write signal |
| 6 | RD | Read signal |
| 7~22 | DB0~DB15 | MCU16-bit Data Bus |
| 23 | NC | Not connection |
| 24 | NC | Not connection |
| 25 | CS | Chip select signal |
| 26 | RESET | Reset input signal |
| 27 | NC | Not connection |
| 28 | NC/XR | Not connection/The touch panel × right |
| 29 | NC/YD | Not connection/The touch panel Y down |
| 30 | NC/XL | Not connection/The touch panel X left |
| 31 | NC/YU | Not connection/The touch panel Y up |
| 32 | DISP |
Standby mode control.(Normally pull high) DISP="L", enter standby mode for power saving. Timingcontroller and source driver will turn off, all outputs are Hi-Z.DISP=H", normal operation. |
| CTP interface Description (CN2) | ||
| Pin No. | Symbol | Description |
| 1 | NC | No connection |
| 2 | NC | No connection |
| 3 | RST | External Reset, Low is active |
| 4 | GND | Ground |
| 5 | INT | Interrupt request to the host |
| 6 | SDA | I2C data input and output |
| 7 | SCL | I2C clock input |
| 8 | GND | Ground |
| 9 | GND | Ground |
| 10 | VDD | Power supply +3.3V |
Applications:
TSD is offering all kinds of TFT LCD with SSD1963 control board that are ideal for different applications including:
Embedded systems
Industrial instrustment
Security equipment
Hand-held terminals
Medical devices
Smart home & White goods
EV Chargers etc
